Click image to view full size image
Technical parameters
Model: KLED-DC24-350AT
Input voltage: DC20-32V.
Output voltage: 13V-27V
Output current: 0mA to 350mA (When output load voltage changes in the range of 13V-27V, the drive current error will not exceed 3%)
Efficiency: ≥ 90%
Power Factor: 1
Operating Temperature: -30° C to 60° C
Dimensions: 146L*50W*40H(mm)
Shell: High-quality aluminum alloy
Product Application:
Suitable for LED fluorescent lamp, ceiling light, down light and track light
Product Features:
1. It adopts patent circuit with no adjustable resistance inside, which can eliminate the quality and life issues caused by the potentiometers.
2. The output-side of LED is completely separated with the input-side to ensure the safety of users.
4. The strict quality control and 100% aging test before delivery.
5. It has passed CE certification with load open-circuit protection, load short-circuit protection and low input voltage protection.
6. IP 65 waterproof rating test.
7. It can drive 4-8pieces of 1W LED, and the drive current is 350mA. ( all LED should be connected in series. )
8. The operating temperature is pretty low; The range of voltage is quite wide; The life-span is considerably long which is no less than 50000 hours. It can be widely used for series of LED lamp and LED electric torch.
9. The two finer wires in the output side should be connected to the output of Central Brightness Controller (Pulse-Width Modulation), the anode (the marked "Signal+") to the anode (the marked "+") and the cathode (the marked "Signal-") to the cathode (the marked "-").
PWM Dimming series waterproof constant current LED driver Power Supply
Any others special requirement, please feel free to contact us
PWM Dimming Series Waterproof Constant Current LED Driver Power Supply
